Hello all,
I´ve been trying to connect my gio to wysiwyg.
Connecting on sACN wysiwyg says console is connected, but no lights are coming up.
On EDMX it won´t connect at all.
IP-settings seem to be alright, as i can ping the PC from the console (and back).
EDMX V4 is allowed, on the console it´s beeing sent and set as standard.
No Firewall, program is working fine with Trankstechnik NTX.
any ideas?
thx,
Tina.
Hi Tina,
The status shown on WYSIWYG is misleading as it will show 'Connected' or 'Receiving' even if the console is turned off!
I recently connected Gio to WYSIWYG, but could only get it to work using the sACN device in WYG, and not via EDMX.
Do you have a configuration similar to the attached screenshot for your sACN connection?
Hi Tina,
The status shown on WYSIWYG is misleading as it will show 'Connected' or 'Receiving' even if the console is turned off!
I recently connected Gio to WYSIWYG, but could only get it to work using the sACN device in WYG, and not via EDMX.
Do you have a configuration similar to the attached screenshot for your sACN connection?
