Fixture Profile Request and Profile Queries

Hello Robin:

Prism would be Beam FX Select

Frost would be Edge

Pan and Tilt fine both simply require that you set the Pan or Tilt to be 16b rather than 8b parameters (just click the box that says 8b and it will change to 16b)

Focus would be zoom.

Prism Rotations would be Beam FX Index/Speed

We would be happy to build profiles for the others- but we need the manuals and a deadline to get started.

Do you happen to have the manuals or links to them?  When do you need these?

Thank you,

Hello Robin:

Prism would be Beam FX Select

Frost would be Edge

Pan and Tilt fine both simply require that you set the Pan or Tilt to be 16b rather than 8b parameters (just click the box that says 8b and it will change to 16b)

Focus would be zoom.

Prism Rotations would be Beam FX Index/Speed

We would be happy to build profiles for the others- but we need the manuals and a deadline to get started.

Do you happen to have the manuals or links to them?  When do you need these?

Thank you,

i think Frost would be Diffusion and Focus would be Edge...

I think that Ueli is correct. Listen to him. :-D

Based on a fixture that I had access to fiddle with, and the info above this is what i have got so far.
CHINESE UNIT ETC CONVERSION
Color Color Select
Shutter Shutter Strobe
Dimmer Intens
Gobo Gobo Select
Gobo Auto Rot. Gobo Wheel Offset Amplitude
Prism Beam FX Select
Pris. Rotate Beam FX Index/Speed
Zoom Zoom
Frost Diffusion
Focus Edge
Pan Pan
Pan Fine LDMX Channel Number (Pan or Tilt to be 16bit (just click the box that says 8b and it will change to 16b)
Tilt Tilt
Tilt Fine LDMX Channel Number (Pan or Tilt to be 16bit (just click the box that says 8b and it will change to 16b)
Function Position Blink
Lamp Control Lamp Control

Hi Sasha,
Here you go.

Microh Trinity 330 http://www.microhpro.com/images/product/1418981718_Ultra-Trinity330-Manual.pdf
Microh Pro LED Nova Panel http://www.microhpro.com/images/product/1386122541_LEDNOVA16-MANUAL.pdf
Microh LED Nova 16 Panel http://www.microhpro.com/images/product/1386122541_LEDNOVA16-MANUAL.pdf
Microh Rio Tri Par http://www.microhpro.com/images/product/1389978308_RIO-TRIPAR-MANUAL.pdf

I can knock up a profile in an emergency, but would perfer it done properly.
Thanks Robin.

Thank you!

Do you have a deadline?

Oh right....end of April. Sooner even better. But end of April will be when ill be starting programming a show using em.

thanks
Robin.

Thank you!

Your requests have been submitted.

Hi Sasha...See em in the new Library Patch...Thanks.