Fixture Profile Request and Profile Queries

Hello Robin:

Prism would be Beam FX Select

Frost would be Edge

Pan and Tilt fine both simply require that you set the Pan or Tilt to be 16b rather than 8b parameters (just click the box that says 8b and it will change to 16b)

Focus would be zoom.

Prism Rotations would be Beam FX Index/Speed

We would be happy to build profiles for the others- but we need the manuals and a deadline to get started.

Do you happen to have the manuals or links to them?  When do you need these?

Thank you,

i think Frost would be Diffusion and Focus would be Edge...

I think that Ueli is correct. Listen to him. :-D

Based on a fixture that I had access to fiddle with, and the info above this is what i have got so far.
CHINESE UNIT ETC CONVERSION
Color Color Select
Shutter Shutter Strobe
Dimmer Intens
Gobo Gobo Select
Gobo Auto Rot. Gobo Wheel Offset Amplitude
Prism Beam FX Select
Pris. Rotate Beam FX Index/Speed
Zoom Zoom
Frost Diffusion
Focus Edge
Pan Pan
Pan Fine LDMX Channel Number (Pan or Tilt to be 16bit (just click the box that says 8b and it will change to 16b)
Tilt Tilt
Tilt Fine LDMX Channel Number (Pan or Tilt to be 16bit (just click the box that says 8b and it will change to 16b)
Function Position Blink
Lamp Control Lamp Control

Based on a fixture that I had access to fiddle with, and the info above this is what i have got so far.
CHINESE UNIT ETC CONVERSION
Color Color Select
Shutter Shutter Strobe
Dimmer Intens
Gobo Gobo Select
Gobo Auto Rot. Gobo Wheel Offset Amplitude
Prism Beam FX Select
Pris. Rotate Beam FX Index/Speed
Zoom Zoom
Frost Diffusion
Focus Edge
Pan Pan
Pan Fine LDMX Channel Number (Pan or Tilt to be 16bit (just click the box that says 8b and it will change to 16b)
Tilt Tilt
Tilt Fine LDMX Channel Number (Pan or Tilt to be 16bit (just click the box that says 8b and it will change to 16b)
Function Position Blink
Lamp Control Lamp Control