We're teching a show right now and my Lighting Designer is having trouble seeing some of the text on the screen due to it being a dark purple color. When will we get a way to change the default colors on the screens? My eyes are pretty darn good and I have trouble seeing the purple as well - it's fuzzy and I can't tell the difference between 30 and 50 from more than 2 feet away. Is this feature in 1.4 already and we just haven't had time to look for it? We upgraded right before tech and a manual would be handy.
I am the LD that is having trouble seeing the tracked levels in dull purple. I really CANNOT read the levels quickly and easily. I have resorted to asking the board operator "what level 27 is at". I thought those days had passed us by in the 1980's!!! The tracked levels need to be quickly and easily readable. I agree that the changed levels should be brighter than the tracked, but there is too much difference between them.
I am the LD that is having trouble seeing the tracked levels in dull purple. I really CANNOT read the levels quickly and easily. I have resorted to asking the board operator "what level 27 is at". I thought those days had passed us by in the 1980's!!! The tracked levels need to be quickly and easily readable. I agree that the changed levels should be brighter than the tracked, but there is too much difference between them.
Hi there. Provided the monitors are properly tweaked, if you set the desk to High Contrast Mode in setup, you'll see magenta at very similar values you can see it on Obsession. There is increased variability in high-res monitors, but it shouldn't be far off (in high contrast mode).
