Client Playback Status is Not Following Primary

Hey everyone,

I'm running 2.5.1 on Gio. I have my Primary as an RVI, Gio as backup, and Nomad running client to give my Stage Manager a cue list. All of these are set on different users. We run shows from the Gio in the booth. Due to format issues (all of my monitors have different resolutions) I'm having trouble getting my client display to follow along with the master cue list on Gio. It will follow in mirror mode, but the display isn't large enough for my Stage Manager to comfortably read it. If I stop mirroring, I have to manually page the client cue list so it will keep up. I feel like I'm missing something simple.

Thanks!

0 ueliriegg over 8 years ago

could it be that the difference between the Cue List display and the PSD caught you? Tab 2 aka PSD is the one that follows active cues, Cue List display does not.
because all your devices have different users and because the assignment of the Master Fader Pair is user based, you might have to assign your cuelist to the clients master fader pair. on the client: Cue 1/ [Load] (but do this before not during the show)
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 afaulhaber over 8 years ago in reply to ueliriegg

Its the PSD tab. Currently it is not mirroring, I'm sitting in cue 98, and the client in PSD is sitting at the top of the stack. This is a single cue list show, nothing fancy. It was mirroring my primary device, but in client mode without a dongle, I cant change its user to match anything right now.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 Ryan over 8 years ago

We have been having this same problem at my house, running 2.4.9. none of my devices that are a different user # then the back-up from which we program and run cues from are following the cue list unless you press live live. Whats going on with this Etc??
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 ueliriegg over 8 years ago in reply to Ryan

hi ryan. i think the answer is in my previous post. since every user can have a different assignment on his/her master fader pair, it could be that currently no cuelist is assigned to any of your clients faders. could that be?
if so: in your clients assign the cuelist to the amster fader pair. or you can do this centrally from any console for all users by using tab 35.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 Ryan over 8 years ago in reply to ueliriegg

will try at the next break
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel