• State Not Answered
  • +1 person also asked this people also asked this
  • Date
    afaulhaber
  • Date
  • Replies 5 replies
  • Subscribers 185 subscribers
  • Views 3514 views
  • Users 0 members are here

Client Playback Status is Not Following Primary

Hey everyone,

 

I'm running 2.5.1 on Gio. I have my Primary as an RVI, Gio as backup, and Nomad running client to give my Stage Manager a cue list. All of these are set on different users. We run shows from the Gio in the booth. Due to format issues (all of my monitors have different resolutions) I'm having trouble getting my client display to follow along with the master cue list on Gio. It will follow in mirror mode, but the display isn't large enough for my Stage Manager to comfortably read it. If I stop mirroring, I have to manually page the client cue list so it will keep up. I feel like I'm missing something simple.

 

Thanks!

 

 

Parents
  • 0
    could it be that the difference between the Cue List display and the PSD caught you? Tab 2 aka PSD is the one that follows active cues, Cue List display does not.
    because all your devices have different users and because the assignment of the Master Fader Pair is user based, you might have to assign your cuelist to the clients master fader pair. on the client: Cue 1/ [Load] (but do this before not during the show)
Reply
  • 0
    could it be that the difference between the Cue List display and the PSD caught you? Tab 2 aka PSD is the one that follows active cues, Cue List display does not.
    because all your devices have different users and because the assignment of the Master Fader Pair is user based, you might have to assign your cuelist to the clients master fader pair. on the client: Cue 1/ [Load] (but do this before not during the show)
Children
Related

www.etcconnect.com