Kino select 30 color profiles

Question

Hi there, sorry if this has been answered already. 
 I'm having a real hell of a time trying to find fixture profiles for the Kino Flo select 30 in color mode to use on my ions. The current fixture library seems to only have a profile for white mode. I called Kino and asked if they had any leads on tracking down the profile, they said it was up to ETC to put them out. 
 I know I could make a custom profile, but it doesn't seem to match up the gel picker properly. 
 Thanks for the help!

Nick Simmons · Accepted Answer

The 'Diva-Lite LED' has the same DMX mapping as the Select LED and the Diva-Lite is in the fixture library they just don't call them LED. 
 
 As I said I used the used the Select Fixtures at the beginning of the week but I didn't test any of the colour I just adjusted colour temp. 
 Attached is a showfile with just these fixtures from the update fix lib if needed (but they are called Diva), although I would assume they are in the release 2.5.2 software. 
 Diva_Select Kino Flo's 2017-03-31 10-33-46.esf

Nick Simmons · Answer

Are you trying to control Gel settings? 
 The values are a little confusing looking at the manual. I would try setting the tint to -100 this is 0 DMX so I don't know if this is what Kino Flo are calling >3. 
 This is a screenshot from the 7 channel fixtures, I've set the Colour Mix parameter using a DMX values by using / / to set DMX. Adjusting the tint value should switch over to the Gel number at some point. Maybe setting the ColourMix param to 22 (deep magenta) would be easier to see.

Deetsch · Answer

Ok gentlemen. I spoke with a KINO representative at Cinegear. There are 3 modes for all of the new KINO color stuff (including the DIVA mentioned above). 1) "White Mode" 2) "Gels/Hue Mode" & 3) "RGB Color Mode" The DMX mapping may be just fine with everything you are trying...BUT (and this is a big one), the mode MUST BE SELECTED MANUALLY at the HEAD. In other words, there is NO DMX channel to switch from "White Mode" to "RGB Color Mode" a la Skypanel's "Crossfade" channel. KINO is going to enable this function eventually but it will be through RDM.

Kino select 30 color profiles

Top Replies