Hi!
I´ve recently updated version EOS 2.6 our Element 250/60, and I´m very satisfied with new features like a pixel map, presets etc, good job!
With this features the console is better than when we bought it.
To make it almost perfect it would be possible in future when we configure the sub as a effect, configure one sub with intensity and another with rate?
Thanks a lot!
On Element do you have Tab 36 Fader Config?
If so open this and change the Fader from x1 to x2, you can then configure the second fader as Effect Rate.
Effects on sub have been greatly improved in 2.6 but this isn't reflected in the supplement or the 2.6 video.
You can now use the Bump Button to Flash the content up, like a normal sub, you can also have non effect data stored in the sub as well.
On Element do you have Tab 36 Fader Config?
If so open this and change the Fader from x1 to x2, you can then configure the second fader as Effect Rate.
Effects on sub have been greatly improved in 2.6 but this isn't reflected in the supplement or the 2.6 video.
You can now use the Bump Button to Flash the content up, like a normal sub, you can also have non effect data stored in the sub as well.
Ueli is correct, you cannot make a 2x or 3x Fader handle on Element. You can edit the Properties of your Sub Live by typing Sub nnn on the Command Line, then Softkey 5 [S5] "Properties":
You can set the Sub Inhibitive there.
You can also make edits in the Sub list you see when you press [Sub][Sub]. (Make sure your CIA is open)
