Hello,
How do I patch multiple dmx addresses to one channel
and how to do patch multiple stage pin addresses to one channel all on a etc ion
thanks,
Alex

Question

How do I patch multiple dmx addresses to one channel and how to do patch multiple stage pin addresses to one channel all on a etc ion

tdrga · Accepted Answer

Alex, 
 Open the Patch tab (Tab 12). 
 Make sure that you are in Channel order, so that the left column title is "Chan". If not, press the [Format] key. 
 Type your channel number, then "at", then the list of your addresses or dimmers. For example: 
 1 at 2+8+17+19 
 This will patch addresses 2 and 8 and 17 and 19 to Channel 1. You will see that Channel 2 has 4 parts, each with an address. 
 If you need to patch an address in a specific universe (above 512), then you would use Universe/Address, like 
 2 at 2/57+59+61 
 This will patch addresses 57 and 59 and 61 from the second universe to channel 2. 
 It's the same process for "stage pin" addresses - they are just addresses that correspond to the dimmers in your venue. 
 There are good Ion training videos that cover this - you can watch them them at http://www.etcconnect.com/EosFamilyVideos/Level-1/

Hello, How do I patch multiple dmx addresses to one channel and how to do patch multiple stage pin addresses to one channel all on a etc ion thanks, Alex