Scroller Calibration on ION, latest soft. New to ION console

you need to keep Shift pressed while moving the encoder, this allows you to move the colors slowly. when the color looks correct you press the encoder and then there is a softkey Calibrate

Thank You.

I calibrate all of my scrollers apart from one. I can not calibrate because scroller moves the gel only few centimetres and I don't have a option to center the wright color under correct color name. is like the scroller see only length of three color from nine.

can I copy settings from other scrollers to this one

Thank You.

I calibrate all of my scrollers apart from one. I can not calibrate because scroller moves the gel only few centimetres and I don't have a option to center the wright color under correct color name. is like the scroller see only length of three color from nine.

can I copy settings from other scrollers to this one

this could also be a hardware problem. if you type Chan x Scroller // 0 Enter does it go t the first color? and if you type Chan x Scroller // 255 Enter does it go to the last color?

if your trying to calibrate but you don't have the correct color name anymore there is a trick: you can calibrate in smaller steps. so you move with shift the color until the display changes. then you move back a little bit until you have the correct name again and Calibrate. no you can move it a bit more, Calibrate. you can repeat this until the color is centered.
so just take smaller color steps when calibrating