Colorsource CYC - Ion Xe20 profile glitch

I encountered a Display Glitch on the fixture profile of the Colorsource CYCs today.

I had preped them on my Nomad at home & had no issues.

Upon getting to the theatre today, my Ion Xe20 presented a different display with the same show file.

The Xe20 displays as if they were in 5-channel mode, although the profile is indeed Direct mode. (The colour picker correctly shows all 5 colours + Strobe)

but the tombstones only show 3-colour + a blank strobe column.

Parents

ueliriegg over 7 years ago

Did you check if by any chance you have suppressed parameters? Keep [Data] pressed and then in the CIA check that all the missing color parameters and shutter strobe are highlighted
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel
Wuz314159 over 7 years ago in reply to ueliriegg

Yes. I opened the whole file.
Yes, I checked the patch. (I set it to 5-channel then back to Direct. Same look.)
No, I did not think to look for Suppressed Parameters, but I retyped the patch info and nothing was different.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel
ueliriegg over 7 years ago in reply to Wuz314159

Unless you saved a snapshot the display config doesn't travel with the showfile. So you inherited the parameter suppression from whoever used the console before
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel
Wuz314159 over 7 years ago in reply to ueliriegg

Well, the first thing I did was Upgrade the Ion to 2.6.4.9.0.3
Then the memory was cleared and I loaded my show file. I also had to load my Snapshot.
and as I'm the only person who uses the console, idk who could have changed the attributes.

I'm not in today, so I can't verify your suggestions. but I feel as if there is no way for the settings to have been changed as you say.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel

Reply

Wuz314159 over 7 years ago in reply to ueliriegg

Well, the first thing I did was Upgrade the Ion to 2.6.4.9.0.3
Then the memory was cleared and I loaded my show file. I also had to load my Snapshot.
and as I'm the only person who uses the console, idk who could have changed the attributes.

I'm not in today, so I can't verify your suggestions. but I feel as if there is no way for the settings to have been changed as you say.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel

Children

No Data