Mirror Mode - Displays

I tried connecting my old work netbook to my IonXe20 in Mirror Mode for the first time yesterday and the process was easy enough, but I have display questions now & I'm not sure why.

First: I only just installed Nomad on my netbook for this test. I didn't get to verify configurations were correct in stand-alone mode. In retrospect, that may have offered clues. No dongle or gadget. cat5 + hub. Netbook running WinXP.

1) The Ion's Screen 1 always contains the CIA? My netbook has one screen, it should have displayed the Ion's Screen 1.... It displayed Screen 2 only. Why?

2) My mirror display was not the same resolution. I only was able to view the top-left ¼ of the Ion's display.

Simulation:

Display was the same resolution no matter what page was active.

(again, I didn't run Nomad on the netbook in stand-alone to see what it displayed there, my bad. but this seems really odd.)

Thanks!

Parents

0 Wuz314159 over 7 years ago

So I'm broaching this subject again because I got no replies the first time around.

Also, I grabbed some more (low-light) photos in case some thought this was a BS problem. :)

Nomad does run fine in stand-alone mode. But mirror mode produces this.

My netbook doesn't have multiple monitors, so Nomad doesn't give me monitor settings in setup.

(The screen1 / screen2 issue I had before went away. No idea why.)

Any thoughts?
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel

Reply

0 Wuz314159 over 7 years ago

So I'm broaching this subject again because I got no replies the first time around.

Also, I grabbed some more (low-light) photos in case some thought this was a BS problem. :)

Nomad does run fine in stand-alone mode. But mirror mode produces this.

My netbook doesn't have multiple monitors, so Nomad doesn't give me monitor settings in setup.

(The screen1 / screen2 issue I had before went away. No idea why.)

Any thoughts?
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel

Children

0 tdrga over 7 years ago in reply to Wuz314159

What is the resolution of your netbook screen? It may not be enough for Nomad to work properly (requires a screen resolution of at least 1280x1024).

Also - I have found that mirror mode works best when the Nomad displays are the same resolution as the console displays.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 Wuz314159 over 7 years ago in reply to tdrga

Netbooks do traditionally have trouble due to aspect ratios, but Nomad does run fine in stand-alone mode. So I doubt a minimum resolution is a factor here.

but matching screen size seems like a bit of logical reasoning.
Although I thought that Nomad only echoed show data, or is it echoing screen resolution data in addition to the show data?

Thanks for the reply though, I was feeling lonely here. :)
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel