Mac Encore Performance: issue in fixture profile

Hello Reinhard

It possible to set the right values in continuous mode by using Shift+Encoder or Ch X Colour Select // to post DMX to the command line and using the correct values.

There are some updates on the way for this fixture from ETC, they've added the correct zoom values and fixed an issue with rotation mode on gobos, they use the same fix on viper fixtures.

In Libary Update from 16.04.18 the Value of Color Select in "Continuous"-mode are still incorect.
Blue hast to be at: 14
Green has to be at: 28
Orange has to be at: 42
Magenta has to be at: 56
Congo has to be at: 70
Red has to be at: 84

André

In Libary Update from 16.04.18 the Value of Color Select in "Continuous"-mode are still incorect.
Blue hast to be at: 14
Green has to be at: 28
Orange has to be at: 42
Magenta has to be at: 56
Congo has to be at: 70
Red has to be at: 84

André