Hello everyone.
* (Soft EOS 2.7.2)
I use a fixture that implements RDM. I connect it to the Dmx 1 or 2 wing universe, but it does not identify the fixture. There is noRDM communication. What can happen?
Thanks in advance.
Hello everyone.
* (Soft EOS 2.7.2)
I use a fixture that implements RDM. I connect it to the Dmx 1 or 2 wing universe, but it does not identify the fixture. There is noRDM communication. What can happen?
Thanks in advance.
eeehhhh !!!! [:O]
I do not understand absolutely nothing.
After many [C][C] try something unusual ... and voila! It works ... but I do not understand it.
It turns out that the ports marked as "Console", are not those of the console .... but then what is its meaning?
[:#][:#][:#] [:#] [:#][:#]
not....
Actually, I was activating ports 1-2 that are marked as a console (?) .... thinking that they were those of the Programming wing.
However, the Dmx-Rdm ports of the programming wing are marked (identified) as Gadget [serial no. --------]
Programming wing only has two DMX-RDM ports.
I imagine that the four ports (Console) DMX-RDM, correspond to Ion, Gio..etc.
For me it is confusing, hence the mistake made.
Summary; confusion with the identification of ports ... my fault. [+o(]