Astera AX1 and AX3 profiles incorrect

Hello, Andrew:

May I ask what version of software you are running and what fixture library?  I see a 16 pixel mode in v2.7.3, but I wanted to make sure I was not missing something further.

Thank you,

Sasha Aranow

I'm running 2.7.2 build 17. I'll update to 2.7.3 later but as of 2.7.2 the astera profiles were incorrect in relation to CCT user values and no 16 pixel mode

The skypanel s60 mode 6 profile was still broken as of 2.7.2; color picker Is not accurate, which I posted about in a seperate thread and no one has taken any notice to solve it. 

Andrew:

Can you please check in the current release?  The 16 pixel mode is available there.

Thank you,

Sasha Aranow

The fixture update you are looking for came out shortly after 2.7.2.  My "Fixture Library Version" in About is listed as 2.7.2.6 and the AX1 Pixel Mode is in there (don't forget to update you other Fixture Libraries as well).  I don't remember if I had to edit that profile or not.  

I have NOT noticed your Color Picker issue with the SkyPanel Mode 6.  The color does seem accurate except that the MS and Home Value in the color picker shows the "Color" as if the Crossfade is at FULL regardless of where it is--so "HOME" looks like Magenta White--just like the Skypanel with the Crossfade at Full.  Have you metered something specifically that is way off?

The fixture update you are looking for came out shortly after 2.7.2.  My "Fixture Library Version" in About is listed as 2.7.2.6 and the AX1 Pixel Mode is in there (don't forget to update you other Fixture Libraries as well).  I don't remember if I had to edit that profile or not.  

I have NOT noticed your Color Picker issue with the SkyPanel Mode 6.  The color does seem accurate except that the MS and Home Value in the color picker shows the "Color" as if the Crossfade is at FULL regardless of where it is--so "HOME" looks like Magenta White--just like the Skypanel with the Crossfade at Full.  Have you metered something specifically that is way off?