Signcomplex CWW36-RGB3 Profile

Hello, Keith:

In order to best determine the answer to your question we would need to see the fixture manual.  Unfortunately I am unable to find that from the link your provided or a google search.  Do you have access to a manual you could share?

Thank you.

Hi

Signcomplex sent me through a .pdf I have attached below, is this information in this any use to you?

Keith

CREE wall washer neutral manual.pdf

There is no dmx chart for the controller in that document as far as I can see,  in fact it looks like its just the manual for the actual LED enclosure and there is a separate controller that you connect up to the fixture that supplies the power to the seperate Red Green Blue circuits.

It the controller bit that;s supplying the power to those led's that someone would need the manual for.  Although if you've got it working with a generic RGB profile that's probably in reality all you need.

Mike is correct- in order to create a profile we need the DMX control layout.  I'm sorry to say this document does not contain that information.

Hi 

Thanks for getting back to me, this is not my main area of expertise so please forgive my lack of knowledge. The DMX unit controlling the fixtures is a LTECH LT-840-5A I cant find an exact match on their website but the closest one is this.

http://www.ltechonline.com/html/en/products/DMX-RDM-Controller/DMX-PWM-CV-type/LT-840-6A.html 

Im presuming there isn't much that can be done with this?

Keith 

Hi Keith:

Based on this info I was able to find a manual here:  https://www.rapidonline.com/pdf/56-1059.pdf

It looks like Generic LED RBGW 8b may be the way to go- it seems the 4th channel is white.  That being said it doesn't have any layout other than that for subsequent cells or anything of that nature- just those 4 channels.

Thank you.

Hi Sara

Thanks for getting back to me on this. We will stick with the generic profile.

Keith

Hi Sara

Thanks for getting back to me on this. We will stick with the generic profile.

Keith