• Date
    rhavin
  • Date
  • Replies 4 replies
  • Subscribers 185 subscribers
  • Views 2307 views
  • Users 0 members are here

Cameo Rotofever in 23 channel mode?

Can someone please tell me how to set up a Cameo Rotofever in 23 channel mode? I dont even have ›Amber 3‹ for the 3rd Pixel, the #2 and #3 colors for RGBW and UV have no %age.

How DO i set-up a 3 zone RGBWA+UV fixure?

Parents

  • this would be an example of a multicell fixture, however you can't currently create those on your own at the moment.

    with the current software it would be easiest to break this into multiple channels: e.g.
    Chan 10 Part 1 = "Master: Pan, Dimmer, Strobe. (custom personality)
    Chan 10 Part 1 = "Master: AutoProgramm and its speed. (custom personality)
    Chan 11 = Pixel 1 (you can use the fixture Generic > LED RGBAWUv 8b)
    Chan 12 = Pixel 2 (you can use the fixture Generic > LED RGBAWUv 8b)
    Chan 13 = Pixel 3 (you can use the fixture Generic > LED RGBAWUv 8b)

    if you post a full manual and a dmx chart as well as a due date ETC can make one for you. usually takes two weeks

Reply

  • this would be an example of a multicell fixture, however you can't currently create those on your own at the moment.

    with the current software it would be easiest to break this into multiple channels: e.g.
    Chan 10 Part 1 = "Master: Pan, Dimmer, Strobe. (custom personality)
    Chan 10 Part 1 = "Master: AutoProgramm and its speed. (custom personality)
    Chan 11 = Pixel 1 (you can use the fixture Generic > LED RGBAWUv 8b)
    Chan 12 = Pixel 2 (you can use the fixture Generic > LED RGBAWUv 8b)
    Chan 13 = Pixel 3 (you can use the fixture Generic > LED RGBAWUv 8b)

    if you post a full manual and a dmx chart as well as a due date ETC can make one for you. usually takes two weeks

Children
Related

www.etcconnect.com