Cameo Rotofever in 23 channel mode?

this would be an example of a multicell fixture, however you can't currently create those on your own at the moment.

with the current software it would be easiest to break this into multiple channels: e.g.
Chan 10 Part 1 = "Master: Pan, Dimmer, Strobe. (custom personality)
Chan 10 Part 1 = "Master: AutoProgramm and its speed. (custom personality)
Chan 11 = Pixel 1 (you can use the fixture Generic > LED RGBAWUv 8b)
Chan 12 = Pixel 2 (you can use the fixture Generic > LED RGBAWUv 8b)
Chan 13 = Pixel 3 (you can use the fixture Generic > LED RGBAWUv 8b)

if you post a full manual and a dmx chart as well as a due date ETC can make one for you. usually takes two weeks

https://adamhall.s3.amazonaws.com/media/MARKEN/CAMEO/CLRF/CLRF_Cameo_DMX_Control_Table.pdf

I'd need it tomorrow in *working somehow* and in a month in working fine.

so for tomorrow your best bet is probably using my instructions from above (or maybe finding a similar fixture in the library and adapt it)

so for tomorrow your best bet is probably using my instructions from above (or maybe finding a similar fixture in the library and adapt it)