Hi all,
Has anyone else been getting small pluses where no small pluses should be? I first noticed it on Lustrs in RGB Strfan +7 mode. A + was showing beside the Colour Palette label, despite everything being in there. I checked them about a million time both in blind Colour Palette and Live to make sure I had all the parameters in there and I did. But still I was getting OW+. Then I saw that it was happening on some of my Lustrs, but not all. They're all patched identically and ByTyped in the CP. I was then that I noticed the really fun bit. Sometimes the pluses were showing in Live but not in Blind or viceversa. I've attached a couple of pictures showing this. You can see that it's the exact same show, the exact same time and that everything is completely blue, but if you look at c1101 - 1106 there's no + in Live but a + in Blind. It's completely inconsistent as to whether it shows or not.
I've started getting it on the Beam attribute for VL3500 Washes too. Once again, I spent eras trying to find an attribute that had somehow gotten away from me or been filtered out, but no joy. I finally accepted it wasn't me being stupid when I recorded a Preset with no attribute filter macro, just 41 Record Preset 176, and it had a plus without me touching anything or recording it or anything. I've attached a third photo showing that.
This is all on a brand new Ti, straight out of the box, running 2.7.2.
Is anyone else getting any of this?
Thanks,
Christina.
