Strobe effect on ion

Create an absolute effect with

step 1 being parameters= shutter strobe level 50 and 0 in all the time columns

step 2 being parameters= shutter strobe level 100 and  time column set to the ramp up time. 

You can set duration to 1 cycle

You can set dwell time to how long you want it to go on at 100 for and/or set the exit as stop and hold depending on what you are actually wanting to do about stopping the effect (maybe easiest to set a long dwell)

You can do the same without an effect either in a cue or just at a command channel 1 sneak 5 shutter strobe 100 which should increase to 100 over 5 seconds.

Create an absolute effect with

step 1 being parameters= shutter strobe level 50 and 0 in all the time columns

step 2 being parameters= shutter strobe level 100 and  time column set to the ramp up time. 

You can set duration to 1 cycle

You can set dwell time to how long you want it to go on at 100 for and/or set the exit as stop and hold depending on what you are actually wanting to do about stopping the effect (maybe easiest to set a long dwell)

You can do the same without an effect either in a cue or just at a command channel 1 sneak 5 shutter strobe 100 which should increase to 100 over 5 seconds.