Eos classic Monitor config

Hi, i believe I might know how to fix this from what you were saying. In the monitor config screen you get the tickable boxes “primary” and one other (can’t remember it off the top of my head).

Above these boxes you should see a 9x9 grid. The box that is yellow is your primary screen (I believe). Then your other one should be grey, that is your secondary screen. If you drag the grey box to how your monitors are positioned so they corespondent. 

If this doesn’t help or is too confusing visit “  https://support.etcconnect.com/ETC/Consoles/Eos_Family/Software_and_Programming/Eos_Configuration_of_External_Monitors

Or contact ETC Technical Support

Kind Regards

Will

HI Will, Thank you for the response, this was the first thing i tried.  Unfortunately, I believe this is a graphic card issue according to etc support, sending my board out for repair.

Our EOS Classic is doing exactly this now.  

Salazar Just checking if you found a solution. Please let us know, thank you.

Salazar Just checking if you found a solution. Please let us know, thank you.

I’m posting an update as it is fixed now, in case someone else has the same issue.

So I tried this again a few weeks ago. I tried again setting the second external monitor to ’E’ in the shell and enabling it but it failed again.

Just to see what would happen, I tried setting it to the only other option shown which was ‘F’ and that worked. All Monitors are working properly now.