ION Ecoder wheels and MAC 700's

I have rented 4 MAC 700 profiles for a production I am working on. We just got our ION last summer so I am still learning, but I have run into an issue. When I am in the image screen or even the focus screen for movers and try to use the function where you hold down the encoder and jump to next or mode, etc it will sometimes cause the 700's to go into what appears to be a pre-programmed effect and douse almost completely out. I then have to home the fixtures to get control back. Am I missing something?

Parents

jeff_a_davis over 16 years ago

I have also experienced this with a vl1000. But in my case its when I fumble and put beam into the command line type a number (i.e. beam 200) and hit enter, then it closes shutters and does all sorts of fun stuff. Don't REALLY know if that bit of info is helpful to your case, just thought i'd mention.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel

Reply

jeff_a_davis over 16 years ago

I have also experienced this with a vl1000. But in my case its when I fumble and put beam into the command line type a number (i.e. beam 200) and hit enter, then it closes shutters and does all sorts of fun stuff. Don't REALLY know if that bit of info is helpful to your case, just thought i'd mention.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel

Children

No Data