Custom Fixture - PT Speed

It's really about finding a parameter in the list and choosing one that has a name that lets you remember what it does.

In Eos fixture personalities are "normalized". So to make sure different fixtures can be handled simultaneously and in a similar manner, ETC doesn't always use the exact parameter name the manufacturer proposes.

PTspeed would usually be Position MSpeed in Eos. But for most parameters it doesn't matter, it's all about what will help you remember (and finding a parameter name that belongs to the correct encoder category).

Ok, I get the idea an am using "Pan MS Speed" 0 > 100. I notice the 0 > 100 (% ?) in the ranges column. How do I change that to absolute DMX values?

Next up is one of those DMX addresses that has multiple part e.g. 0 <> 009 is white, 010 <> 019 is red and so on.

Do I enter each in a separate row with a label (like "White") and then set its "Ranges"   0 > 090 and so on? 

click where it says 0 > 100. you can enter the range values there. that's also where you create additional ranges. so you have Color_Select as parameter and within that you will use different ranges

click where it says 0 > 100. you can enter the range values there. that's also where you create additional ranges. so you have Color_Select as parameter and within that you will use different ranges

Aha! Got it. Deleted the White, Red rows and made a "Color Select" with the different ranges inside for all the colors. Looks good in the "ML Controls" screen" as well! Thank you.