Secondary Cuelist

Ryan, do you mean the selected cue?  I'm assuming List 1 is your cue list and List 111 is Jason's?  So you are saying when you turn the system on, your selected cue is from Jason's list and his selected cue is from yours??   Hmmm.... what's your shut down procedure? 

a

First Jason shuts his board then i shut down mine. I goto 0.1 before I shutdown my console, I would assume Jason does the same.  Then the master gets shutdown last.  What I mean is My command line ref. cue list 111 being Jasons he says when he starts it shows my list 1 on his command line.  I'm just curious why his list shows up on my line. 

It's a fine question.  Will look into it.

a

Thanks,  Last night I tried again, Shutdown all but the master, then reloaded list 1 to command line then resaved the show.  This morning when i started the Master desk List 111 was on the command line, strange

So last night we shut down, still had a problem this morning.  1st Jason went to Q0.1 on list 111 then unlinked his list to mine and we saved the show.  I was also in Q0.1 on my list 1.  He shutdown his Eos (client) then I shutdown mine (back-up)  I looked b4 I shutdown his list was in 0.1 and my list was in 0.1.  Then I shutdown the master.  Came in this morning turned on master his list was on the command line Cue111/220, for some reason his list was in Cue 220, therefore as soon as I turned the desk on his list went to Q 220, therefore stuff turned on. (not good)  Anyway so I linked the lists and went to 0.1.  Of course I did have to reload my list 1 to the command line. Built a macro

Anyone ???

We shall try again tonight, i'll be sure to tell you B4 I go to 0.1, maybe we can come up with something

No, luck again.  This this morning when I turned on the master guess who's list was on the command line.  Yours, list 111 also I noticed that your list was in Q100 for some reason.  You didn't put your list in Q100 last night did you?  The last I saw we were both sitting in 0.1 when I saved and shutdown. 

This apparently, is a BUG, a very bad bug at that!  Guess we'll keep trying different stuff, The unlinking of the lists didn't seem to work

-You took both consoles to Cue 0.1 with the linked cuelist.
-I then did GoTo Cue 100.
-Then I did GoTo Cue 0.1
-Unlinked cuelists.

So when I shut the console down I was in Cue 0.1.

Sounds like the desk is restarting 2 commands previous B4 shutdown.

Maybe Tues. we'll goto 0.1 twice or even three times B4 we shutdown.

But that still doesn't explain why your list shows up on my line, does it?

I don't think you will find a workaround to the wrong cuelist being posted to your command line. This is fixed in 1.5, but in 1.4, the logic for which cue it makes your selected cue on startup was incomplete and didn't account for multiple master playbacks. In 1.5, it will be the active cue from your master playback.