If I missed this in searches I apologize.
I'm interested doing some pixel mapping with dmx tape in near future, but I've been hesitant due to Element address/channel restrictions at the venue I work in most often. I have the nomad dongle & gateway and was wondering if could use this setup to bypass the restrictions. Ultimately my plan would be to control the tape using the nomad set up in a cue list. The remainder of the rig would go through the Element as usual with cue triggers being sent to the nomad through the Element operator. I assume I could use two operators if I really was in a jam, but having them linked to trigger would be far easier if crew was limited. Hopefully this all makes sense.
Would this help me get around the address & channel restrictions? Is there a better way, or better piece of equipment, to accomplish this? This is all hypothetical currently so I'm afraid I don't have specific part numbers or requirements. I'm trying to work it out from control & stay within those limitations.
Thanks in advance.
