[Feature Request] Group 0

Don't have that problem if you make channel 11 your first channel.

I agree, but am powerless to force designers to use better numbers.

And I don't think it makes sense that the first 10 channels of the console need to be treated as second class citizens.

Before i work with EOS my Show ever starts with Cue 101.
Because i used the Numbers 1-10 for Warm Up, Autostart,...
And start with Cue 11 is not so fine.

All guys i work with have accept this system.

And,...a LD not tell an Operator how he must organize his Lightdesk...

At every theater I work at the lighting designer submits the plot and picks channel numbers then, as well as deciding what cues to use. The programmer in theater is really just the conduit through which the designer controls the lights.

At least how that's how it works in theater in America.

That's America. Continental Europe is different. In Germany or Switzerland it has to fit in the rep plot, so the LD will draw a plot indicating where he wants additional lights. The programmer or head LX decide which number they get. Same with groups. And the moment the LD starts calling out buttons to press the programmer leaves the desk or slows down until they stop...

That's America. Continental Europe is different. In Germany or Switzerland it has to fit in the rep plot, so the LD will draw a plot indicating where he wants additional lights. The programmer or head LX decide which number they get. Same with groups. And the moment the LD starts calling out buttons to press the programmer leaves the desk or slows down until they stop...

Yes. It definitely works differently across the world.

This issue is obviously less applicable when the programmer gets to pick the numbers. But the American market is large enough that I think this is still a legitimate feature request.