Hello, I have found a bug and would like to report it. I am working in Multiple Cue lists on a Nomad, sometimes much to my chagrin when I press Back on one Fader to go to it's Cue 0 and Play on another Fader before the move is finished - That Cue I expect to load instead of loading I get a black out because the Fader I pressed Back to get to Cue 0 on Loads into both the Faders. I was just reading through the manual and was reading about [Go To Cue 0] & [Load] and as soon as I tried it instead of going to Cue 0 on my Cues 900/1 and 901/1 it loaded Cue 1/1- I took a screen shot. You can see Cue List 900 and 901 Fader is blank on the Cue List Index, on the Fader page you can see they have both been replaced by Cue 1/1 and in the Fader list you can see it says the Cue's are still assigned to the Faders I assigned them to.
I'd also like to refer you to this post I made a few months ago please, https://community.etcconnect.com/control_consoles/eos-family-consoles/f/eos-family/32252/one-virtual-fader-won-t-clear-the-other-ones-work-normally
I forgot to mention that when this happens and the Faders over write each other, I can not unload the Fader without following the tip I got from ueliriegg