• Date
    MikeyMike
  • Date
  • Replies 8 replies
  • Subscribers 186 subscribers
  • Views 2078 views
  • Users 0 members are here

Bug with GoToCue 0 over riding virtual faders by reloading them with a different cue which causes black outs.

Hello, I have found a bug and would like to report it. I am working in Multiple Cue lists on a Nomad, sometimes much to my chagrin when I press Back on one Fader to go to it's Cue 0 and Play on another Fader before the move is finished - That Cue I expect to load instead of loading I get a black out because the Fader I pressed Back to get to Cue 0 on Loads into both the Faders. I was just reading through the manual and was reading about [Go To Cue 0] & [Load] and as soon as I tried it instead of going to Cue 0 on my Cues 900/1 and 901/1 it loaded Cue 1/1- I took a screen shot. You can see Cue List 900 and 901 Fader is blank on the Cue List Index, on the Fader page you can see they have both been replaced by Cue 1/1 and in the Fader list you can see it says the Cue's are still assigned to the Faders I assigned them to. 



Parents

  • It happened again today. I sat loaded EOS, did [Cue 300/ Copy to Cue 900/] then loaded Cue 900/ to Fader 9/1, then [Cue 301/ Copy to Cue 901/] and loaded it to Fader 9/2, then [Cue 302/ Copy to Cue 902/] and loaded it to Fader 9/3

    I pressed play on virtual Fader 9/1 and the Cue played as expected, then I pressed back to clear the cue and the cue went out as expected.
    I pressed play on virtual Fader 9/2 and the Cue played as expected, and I left the cue up because that's where we were going to start the day.

    I then pressed play on virtual Fader 9/3 and instead of playing Cue 902/1 that I loaded to the Fader, the Fader loaded Cue 900/1 Instead.

    I unloaded the fader and tried to load cue list 902/ again, The console says that cue list 902/ is loaded to the fader again. I press play again and again the Fader changes from Cue list 902/ to Cue list 900/

    I go into the Fader Display tab, I type Delete 9/3 and then Load cue 902/ again. This time when I press play, Cue 902/1 plays (as "expected")

  • in reply to MikeyMike

    I'm having trouble replicating this. Could you post your show file?

  • in reply to Jake Pomeroy

    Hello, here is my showfile. I am using a mouse, I don't know if that is relevant or not. It happened again today, The last Cue list I loaded to a Virtual Fader cloned itself onto another fader unexpectedly and all I did this time was simply click the Load button that is over the virtual fader I wanted to look at. 

    It happens on two different PC computers running version 2.9.1 build 17 and Windows 10

Reply
  • in reply to Jake Pomeroy

    Hello, here is my showfile. I am using a mouse, I don't know if that is relevant or not. It happened again today, The last Cue list I loaded to a Virtual Fader cloned itself onto another fader unexpectedly and all I did this time was simply click the Load button that is over the virtual fader I wanted to look at. 

    It happens on two different PC computers running version 2.9.1 build 17 and Windows 10

Children
Related

www.etcconnect.com