I had a load of lights up during a rehearsal but wanted to put just one channel into a sub. Raising that channel and recording a sub would put everything currently up into the sub, while I want only that channel in it.
I had a load of lights up during a rehearsal but wanted to put just one channel into a sub. Raising that channel and recording a sub would put everything currently up into the sub, while I want only that channel in it.
Chan 1 Record Sub 2 Enter
I'm at home using the editor. As an experiment I put chans 1 thru 9 to full. But now want to record only chan 2 to sub The manual (p365) tells me to use "2 Record Sub 1 Enter" as did your reply. I then called up sub 1 and expected to see just chan 2 at FL. But they all remain at zero.. I know I am doing something wrong
Oh lordy, my bad. I forgot that using the virtual keyboard at home I have to use {Recall From] [Sub] [1] [Enter].
Plain [Sub] [1} [Enter} won't hack it Sorry!
[Sub] 1 [Enter] will only select the sub, both on console and nomad.
[RecallFrom] [Sub] 1 [Enter] will pull the values from the sub and insert them as manual values into live, both on console and nomad.
[Sub] 1 [At] [Full] [Enter] will set sub 1 to full, both on console and nomad.
Got it and thank you. Will be in theater tomorrow and put this into practice.
Got it and thank you. Will be in theater tomorrow and put this into practice.
www.etcconnect.com