Probs a simple mistake and answer here...
I'm making my way with the training and all good.
Currently have a play around with capture and I've ran into this error on Nomad, but was fine when I was doing the training chapter of palettes ...
Everything is patched and channelled etc fine.
Groups are created have channels in them.
I got to create a focus look I which to create a palette with ...
group 3 record focus palette 50 label up
Then i go to recall this
group 3 focus palette 50 enter
Then I get an Error : Channel List is Empty
Many thanks in advance
you have no data in your focus palette, as Wuz mentioned. the reason seems to be that you have active filters that prevent the Record command from working the way you want. you can see that there are filters…
Have you checked both in blind, the group and the fp?
in group there is the channels
in focus palette, the column of by type channels is empty, not sure if relevant, but my other palettes works
how did you record the fp and have you tried rerecording it?
I set the moving lights into position then ..
[select last] [record] [focus palette] 
I appreciate your help !
Weird, if the channels are definitely manual then I don't see the issue...
I assume you've tried it without the groups, i.e. channel by channel, and make sure you're not in any cue..
Yes i have tried without groups and done go to cue 0
I have try again later...
Many thanks though !
can you type [Blind][FocusPalette][Enter], then [Group][Enter] and then take a screenshot?
So obviously, there is no data recorded in your FP. 2 thoughts:
1) Be certain that your [Select Last] selects the channels you just manipulated.
2) Be sure to follow up that command line with an [Enter] (Not sure if you didn't type it or didn't enter it.)
you have no data in your focus palette, as Wuz mentioned. the reason seems to be that you have active filters that prevent the Record command from working the way you want. you can see that there are filters by the red text in the Form and Image parameter category buttons.
expand the CIA, click the Filter button, then click the Clear Filter button, and then start the whole thing by re-recording the focus palette again.
Thank you Ueliregg !!! Rookie mistake on my part. The filters (not sure how I turned them on) was indeed restricting me.
All good now operating how I want it to ! I've understood what was happening
Many thanks all for helping.