Hello guys, anyone knows how can i create inhibitive fader to reduce all the levels as percentage and not absolute. Example : when i reduce the fader down by 10%, channel 50 goes to 45% from 50% and channel 6 goes to 90% form FULL.
Hello guys, anyone knows how can i create inhibitive fader to reduce all the levels as percentage and not absolute. Example : when i reduce the fader down by 10%, channel 50 goes to 45% from 50% and channel 6 goes to 90% form FULL.
Inhibitive Subs affect their respective channels via percentage the same as Ueli's example @ /90 Enter.
In your example I have Channel 1 at 50, Channel 5 at Full. I then pull my Inhibitive Sub down to 90%. Channel 1 is now at 45 and Channel 5 is now at 90.
Are you seeing something different?
Inhibitive Subs affect their respective channels via percentage the same as Ueli's example @ /90 Enter.
In your example I have Channel 1 at 50, Channel 5 at Full. I then pull my Inhibitive Sub down to 90%. Channel 1 is now at 45 and Channel 5 is now at 90.
Are you seeing something different?
Thank you all. that's exactly what an inhibitive sub does. It was my fault to ask before double checking...
www.etcconnect.com