Sensor dimmer in fixture library

What is the difference in the fixture library between a sensor dimmer and a plain vanilla dimmer? Should I go through my master show file to change them, and is there a way to do this globally rather than individually? Finally, does this profile sit well with all the flavors of sensor dimmers, I have mostly D20DHR modules with a few R20AF modules thrown in.

Parents

0 BrentFJ over 15 years ago

Hi Greg

Not sure what the difference is, but if you do want to change them all at once, in patch, select all the chans that you want to change, then press [type] then select what you want.

This is also handy if you are on tour for instance, and get different types of wobblys in a town and need to change the profile for them.

Cheers
BFJ
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 Anne Valentino over 15 years ago in reply to BrentFJ

At the moment, the different is a display convention. In 1.5, when using dimmer feedback, this will help indicate if you should be expecting information back from the dimmer or not.

Hope that helps.

a
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 Gregg over 15 years ago in reply to Anne Valentino

Anne,

Does this require that the CEM+ software be updated to 3.0 in order to be fully implimented, I currently have 2.1.0.9.0.24.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 Anne Valentino over 15 years ago in reply to Gregg

You will need v3.0 for the CEM+. If you have AF modules, you'll be able to get module level load reporting. If you don't, the feedback will be on the racks.

:-)

a

[edited by: Anne Valentino at 2:02 PM (GMT -6) on Tue, May 26 2009]
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 Sammy over 12 years ago in reply to Anne Valentino

A couple of quick question on the subject of Sensor Dimming fixture:

1. Does the fixture Sensor_Dimmer determine whether or not you are able to get feed back or not, or will you get that no matter what fixture you patch it as? e.g a Standard Dimmer.

2. Could we get a Non-Dim Sensor Dimmer Fixture? I really like seeing the ND in my channel display.(I suppose the answer to the first question will determine whether i just use a generic Non Dim fixture or not)
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 speterson over 12 years ago in reply to Sammy

Sammy,

The Sensor Dimmer will always be the fixture type patched when Sensor Feedback is enabled and you have enabled discovery in Patch. Once you have discovered the dimmers, if you disable Device Discovery in Patch but keep Sensor Feedback Enabled in the Shell, you can change the fixture type to another type, say Non-Dim, and continue to get the feedback in About.

You can always create your own fixture type of Non-Dim Sensor Dimmer and patch it following the steps above.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel

Reply

0 speterson over 12 years ago in reply to Sammy

Sammy,

The Sensor Dimmer will always be the fixture type patched when Sensor Feedback is enabled and you have enabled discovery in Patch. Once you have discovered the dimmers, if you disable Device Discovery in Patch but keep Sensor Feedback Enabled in the Shell, you can change the fixture type to another type, say Non-Dim, and continue to get the feedback in About.

You can always create your own fixture type of Non-Dim Sensor Dimmer and patch it following the steps above.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel

Children

No Data