• Date
    Robert452
  • Date
  • Replies 11 replies
  • Subscribers 188 subscribers
  • Views 2827 views
  • Users 0 members are here

Loop, Link and Follow

Is it possible to use Link, Loop and Follow on a group of cues at the same time? (I'm experimenting) 

I have 10 cues. I want to GO 1 thru 3 per normal. On GO to 4 I want 4 thru 9 to auto GO (Follow) until 9. (9 should then go back to 4 and repeat this (lop) 3 times.

"Cue 9 link 4 loop 3"  works fine - but I must use GO to start again.

I then used "Cue 4 thru 9 follow 2" to GO back to 4 upon 9 completion.

But it stops on 9 and I need the GO button! I'm sure this is is a case of me getting the wrong cue #'s in my commands. 

Parents

  • I simplified this to only four cues. By putting a follow on 2 thru 4 it will automatically walk through the cues. But I want to repeat this 3 times so I put a 4 through 2 loop 2 to go back to 2, run through 3 and 4 and then loop back again x 3. But once we get to 4 it stops. I.E. we don't loop back. Here's the weird thing I got this going once byt could not reproduce what I had done. 

Reply

  • I simplified this to only four cues. By putting a follow on 2 thru 4 it will automatically walk through the cues. But I want to repeat this 3 times so I put a 4 through 2 loop 2 to go back to 2, run through 3 and 4 and then loop back again x 3. But once we get to 4 it stops. I.E. we don't loop back. Here's the weird thing I got this going once byt could not reproduce what I had done. 

Children
No Data
Related

www.etcconnect.com