iRFR set up - console IP

you tried to use an IP address that's already in use somewhere in the network. all IPs have to be unique within the subnet defined by the subnet mask. do you have a list of all IP addresses already in use by the network?

A bit more info for what its worth

Console is running software version 2.9.9

iRFR is version 4.0.1.2

Thanks for the reply ueliriegg although I'm not sure what you mean when you say I'm using an IP already in use as the Ion isn't networked.

I still haven't figured this out. In my experience this is where i've always looked to find the console IP address. On this console however the IP and subnet are a load of zeros. Is there a reason the console isn't displaying an IP address? 

If anyone can point me in the right direction by explaining why I can't get the IP address I'd be super grateful. I have a feeling it's something simple which I've overlooked!

Here's hoping

You need to set a valid IP address on the Ion, or select "Obtain an IP Automatically" if you have a DHCP server on the network (such as a Router).  A valid address might be:
IP: 10.101.100.101
Subnet: 255.255.0.0
Gateway: 10.101.1.1

But depends on what else is on the network.

"... the Ion isn't networked" doesn't make sense, because you are trying to connect iRFR to it, so it must be on some network.  

Have you taken a look at the iRFR/aRFR Setup Guide?  MobileRFR.fm

as Matt said you must be networked. that probably means the only two other things in your network are the WiFi router or AccessPoint and the mobile/tablet running the app. one of those two things have the same IP as your console and that's not possible.

Sorted. So I was ticking the 'obtain IP automatically' box and still no IP. I did a reboot and there it was.

Thanks for the tips guys ; -)

Sorted. So I was ticking the 'obtain IP automatically' box and still no IP. I did a reboot and there it was.

Thanks for the tips guys ; -)