Delete All NPs from subs

There are a lot of ways to do this.  You could:

• [-]{AllNPs}[Record][Sub][#]
• {Intensity}[Record][Sub][#]
• or set a filter, by pressing the {Filters} tile in the CIA and then pressing the {Intensity} tile. With a filter enabled, you could just use an unmodified [Record][Sub][#], and the console will only store Intensity data.

Each method has benefits depending on your exact workflow.

If you're trying to remove data from existing subs, you could:

• [#][Thru][#]{AllNPs}[Delete][Sub][#]
• [Blind][Sub][#][Enter][#]{AllNPs}[At][Enter]

There are a lot of ways to do this.  You could:

• [-]{AllNPs}[Record][Sub][#]
• {Intensity}[Record][Sub][#]
• or set a filter, by pressing the {Filters} tile in the CIA and then pressing the {Intensity} tile. With a filter enabled, you could just use an unmodified [Record][Sub][#], and the console will only store Intensity data.

Each method has benefits depending on your exact workflow.

If you're trying to remove data from existing subs, you could:

• [#][Thru][#]{AllNPs}[Delete][Sub][#]
• [Blind][Sub][#][Enter][#]{AllNPs}[At][Enter]

Thanks Paul,   I did discover  [#][Thru][#]{AllNPs}[Delete][Sub][#]    on my own, just as I received your input. 

No I plan on learning more about filters.   I think that by using a filter, I can prevent this problem from occurring again.

Hello Stepen,

my Favorite is special Snapshots that have Filter-Sets recorded.

Maybe you have a look into this as well ; )