• State Suggested Answer
  • Date
    PK-Bomber
  • Date
  • Replies 5 replies
  • Answers 1 answer
  • Subscribers 185 subscribers
  • Views 1689 views
  • Users 0 members are here

Faderwing got stuck in bootloadermode after update

I updated our Gio to the latest softwareversion and after that, I had to update the faderwings too.

Something went wrong and now it got stuck in bootloadermode. It's a motorized fader wing 2x5. Does someone know what I can do, except calling the Support?

Thanks a lot, Dominik

Parents
  • 0

    It might be late for you, but here is how I solved the same issue today.

    From the Windows explorer I found a drive F:\ (in my case) called "BOOTLOADER", there was only an empty text file in it.


    I copied the file : "14d5.003c_Display_HS_1.1.1.9.0.1.afx.S19" from C:\etc\nodesbin to the F:\ drive

    On a MFW 2x5 you have 2 displays, one showed the logo, and in the update window, one was not in error, so I matched the names, please be careful and make sure you got the correct one.


    I Started the EOS Settings from the Nomad Shell, and the error was gone, so just needed to do an update again and now everything works fine.

    Good luck
    pat

Reply
  • 0

    It might be late for you, but here is how I solved the same issue today.

    From the Windows explorer I found a drive F:\ (in my case) called "BOOTLOADER", there was only an empty text file in it.


    I copied the file : "14d5.003c_Display_HS_1.1.1.9.0.1.afx.S19" from C:\etc\nodesbin to the F:\ drive

    On a MFW 2x5 you have 2 displays, one showed the logo, and in the update window, one was not in error, so I matched the names, please be careful and make sure you got the correct one.


    I Started the EOS Settings from the Nomad Shell, and the error was gone, so just needed to do an update again and now everything works fine.

    Good luck
    pat

Children
No Data
Related

www.etcconnect.com