Configure Nomad to output sACN to a Node.

Have you ever worked with a external node/gadget?

Because they work nearly all the same way.

The manual is quite clear with helping out:

https://www.manualslib.com/manual/1647710/Showtec-Net-2-5-Pocket.html?page=11#manual

Go have a peek. ; )

Well given that the gadget is USB, and therefore plug and play, I would say this is distinctly different. 

Thanks for the link, but as it just repeats what I wrote in my original post, it is not very helpful to me. 

For others reading: The instructions ask me to set the IP of my computer/console in order to talk to my node. Where do I input this info? I am running windows 10 and nomad 3.0. 

Well given that the gadget is USB, and therefore plug and play, I would say this is distinctly different. 

Thanks for the link, but as it just repeats what I wrote in my original post, it is not very helpful to me. 

For others reading: The instructions ask me to set the IP of my computer/console in order to talk to my node. Where do I input this info? I am running windows 10 and nomad 3.0. 

The ip should be set up in Windows.

if you need any help with this, try the internal help of your computer.

or folllow this article

www.heise.de/.../IP-Adresse-unter-Windows-10-aendern-so-geht-s-4267953.html