Magig Sheet shows incorrect colours

I would check to see if you are using 

"Show gels as gel + lamp output" (the default setting)

or 

"Show gels as gel against white background"

Otherwise, would you please give some examples of colors that don't match?  And remember that if either Series 2 or D40 are in "Direct" mode, that is uncalibrated and colors are not guaranteed to match.

Hey Matt, sorry for responding late. Tried toggling between gels + lamp output and white background but no difference. The difference between actual fixtures isn’t the real problem, but how the MS displays the color. Guess it might be because I’ve heavily modified the color - emitter by emitter?

Hey Matt, sorry for responding late. Tried toggling between gels + lamp output and white background but no difference. The difference between actual fixtures isn’t the real problem, but how the MS displays the color. Guess it might be because I’ve heavily modified the color - emitter by emitter?

Hi Palmi Jonsson , this could also be the difference between using D65 or D50 as the white point.

You can toggle this setting in Setup > System Settings > System > "Display Colors in D65"

The D50 white point was the default in v1.x and v2.x.

In v3.0.0 and higher, the default White Point is set to D65, where "white" is equivalent to 6500K.