Copied from the Facebook Group;
I have subs that I bump a lot with a down time of 1 sec. I also have a cue list with three cues that wrap and are often run a lot along with the subs.
I need to release the cue list over a few seconds fade, so I press release and if one of the subs is still doing a down fade, the channels contained in the sub will fade to the sub’s level and snap out when the release time is done on the cue list.
Why does this happen? The intention here is to stop the cue list, turn off those fixtures, along with a quick bump and a down fade of 1 to transition to the next verse but instead the channels ramp up to full intensity and harshly snap out when the cue list is off.
The cue list contains the same channels the subs contain.
3.1.3 Build 8
(Workaround is instead of having a Release or Off button - use a Macro that does a go to cue out on the list. But please ETC fix this, I actively avoid busking on Eos because I'm always hitting these weird walls.)
Another problem I did never solve that's very similar.
