Computer not connecting as a Client

just checking: you're not saying that you're using the exact same IP address for the console and for the mac, right?

also: you're using the same software version for the console and mac, as well as same fixture library version and the same language setting inside of Eos?

and last but not least: MultiConsole is enabled for the console and the mac and it's active on the correct network card? shell>settings>network

just checking: you're not saying that you're using the exact same IP address for the console and for the mac, right?

also: you're using the same software version for the console and mac, as well as same fixture library version and the same language setting inside of Eos?

and last but not least: MultiConsole is enabled for the console and the mac and it's active on the correct network card? shell>settings>network

The console is 10.101.100.1, Mac is 10.101.100.77

same version :3.1.1 and fixture V3.1.1.6. American English

MultiConsole is Checked on

firewall on the mac?

and the mac has multiple network cards. did you check that you're looking at the correct one?

Firewall is off 

The only network I have running is just the hard line from the computer to the board

and the multiconsole setting as well as the IP/subnet is on that active network connection on both sides?

have you tried disabling WiFi on the mac?

and neither the console nor the mac has Eos started in offline mode?

Correct they both are and both can ping eachother

Yes I have 

Nope. Ion went straight to primary and Mac is on Client

when the Eos software is started on both, press About with an empty command line. this lists information about the console. check again the software and fixture library version. and check if both of them show an IP address.

Both are the same Version and Same Library fixture.

The console shows the same as before 10.101.100.1 and the mac is still 10.101.100.77