Eos in Mirror Mode oddity

Lat night while running our rehearsal the desinger says to me "you should be in cue 135" i looked at my console and sure enough i was laready there but her RVI in mirror mode showed i was in 134.

I took cues as called by the stage manager and the RVI lagged behind 1 cue until I used the go to cue function to take a cue at which time the RVI synced up nicely again. Not sure if anyone has seen this behaviour and again it had no bering on playback at all.

Parents

ETCdsmith over 15 years ago

Hello,

I would recommend pulling the log files off your console and your RVI and send the to ETC

DS
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel
Anne Valentino over 15 years ago in reply to ETCdsmith

Try doing a deep clear on all of your devices. Question. Did the PSD on the RVI ever sync up? Or was it running one cue behind from the point forward?

Thanks,

a
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel
Ncoons over 15 years ago in reply to Anne Valentino

Anne,

We had an "incident" over the weekend where the PSD on the RPU was frozen after the RPU was mirrored to the EOS while playing around with mirror mode. Unfortunately the screen froze during the run of a performance and I was not present. The operator restarted the system and all was fine. I tried to re-create what happened a couple of days later, with no success. All seems fine now.

-Nate
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel

Reply

Ncoons over 15 years ago in reply to Anne Valentino

Anne,

We had an "incident" over the weekend where the PSD on the RPU was frozen after the RPU was mirrored to the EOS while playing around with mirror mode. Unfortunately the screen froze during the run of a performance and I was not present. The operator restarted the system and all was fine. I tried to re-create what happened a couple of days later, with no success. All seems fine now.

-Nate
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel

Children

Anne Valentino over 15 years ago in reply to Ncoons

Nate, can you send the log files from the RPU that froze up to the eos mailbox? eos@etcconnect.com. If you could include the description and approximate time, that would be helpful.

The logs won't help us figure out what happened on the RVI that was out of sync.

Thanks guys.

a
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel