• Date
    ehuber
  • Date
  • Replies 5 replies
  • Subscribers 183 subscribers
  • Views 4861 views
  • Users 0 members are here

Eos in Mirror Mode oddity

Lat night while running our rehearsal the desinger says to me "you should be in cue 135" i looked at my console and sure enough i was laready there but her RVI in mirror mode showed i was in 134.

I took cues as called by the stage manager and the RVI lagged behind 1 cue until I used the go to cue function to take a cue at which time the RVI synced up nicely again.  Not sure if anyone has seen this behaviour and again it had no bering on playback at all. 

Parents Reply Children
  • in reply to Anne Valentino

    Anne,

    We had an "incident" over the weekend where the PSD on the RPU was frozen after the RPU was mirrored to the EOS while playing around with mirror mode. Unfortunately the screen froze during the run of a performance and I was not present. The operator restarted the system and all was fine. I tried to re-create what happened a couple of days later, with no success. All seems fine now.

    -Nate

  • in reply to Ncoons

    Nate, can you send the log files from the RPU that froze up to the eos mailbox? eos@etcconnect.com.  If you could include the description and approximate time, that would be helpful.

    The logs won't help us figure out what happened on the RVI that was out of sync. 

    Thanks guys.

    a

     

  • in reply to Anne Valentino

    it happend again on the next tech day.  Then off to vacation for me so i will update now.  THe RVI showed cues being taken but remained 1 cue behind from the Eos.  Using the goto cue function synced it back up.  i am totaly certian what happened but am pretty sure it occured when i was bouncing around in blind....but maybe not.  It did not affect the playback and the cues ran fine from the console./ 

Related

www.etcconnect.com