Eos in Mirror Mode oddity

Hello, 

I would recommend pulling the log files off your console and your RVI and send the to ETC

DS

Try doing a deep clear on all of your devices.   Question.  Did the PSD on the RVI ever sync up?  Or was it running one cue behind from the point forward?

Thanks,

a

Anne,

We had an "incident" over the weekend where the PSD on the RPU was frozen after the RPU was mirrored to the EOS while playing around with mirror mode. Unfortunately the screen froze during the run of a performance and I was not present. The operator restarted the system and all was fine. I tried to re-create what happened a couple of days later, with no success. All seems fine now.

-Nate

Nate, can you send the log files from the RPU that froze up to the eos mailbox? eos@etcconnect.com.  If you could include the description and approximate time, that would be helpful.

The logs won't help us figure out what happened on the RVI that was out of sync. 

Thanks guys.

a

it happend again on the next tech day.  Then off to vacation for me so i will update now.  THe RVI showed cues being taken but remained 1 cue behind from the Eos.  Using the goto cue function synced it back up.  i am totaly certian what happened but am pretty sure it occured when i was bouncing around in blind....but maybe not.  It did not affect the playback and the cues ran fine from the console./ 

it happend again on the next tech day.  Then off to vacation for me so i will update now.  THe RVI showed cues being taken but remained 1 cue behind from the Eos.  Using the goto cue function synced it back up.  i am totaly certian what happened but am pretty sure it occured when i was bouncing around in blind....but maybe not.  It did not affect the playback and the cues ran fine from the console./