Edit a Preset

The easiest way to remove specific data from a preset is to view it in blind, select the specific data you want to remove and @enter it.  You can use the categories and specific items in the cia to remove just the items you want to.  In your case if you selected the channels and used the intensity and color categories then pressed @enter the data would be gone.  

You can remove the data from live if you select the channels and specific items you want in the preset and then record remdim the preset.  The rem dim command will remove all existing data from the target as it records the new data into the target.

Hope this helps

thank you i should have added i tried that as well....and when i did that (ch# Intesity @ enter) it took all paramterws out of preset...again i may just be that dense but i did try that

thank you i should have added i tried that as well....and when i did that (ch# Intesity @ enter) it took all paramterws out of preset...again i may just be that dense but i did try that

You can also get this same functionality before you record by using Filters. If you push and hold Filter and then select the categorys you wish to record then only that data will get recorded. i.e. Filter+Focus, Beam. When you you record you will only get Focus and Beam. This can also be done with individual parameters. Filter+Tilt, Only Tilt will get recorded. One thing to remember is once you are done using filters to turn them off by repeating the process or a quick way is to hold the Filter key and select Clear Filters. Otherwise you will only record those parameters in everything you record.

Hope this helps!

DS