Keeping effect parameters while recording in a multi-cuelist environment

Have you tried adjusting your new cue 2/1 then updating again?

Just a shot in the dark...

Yes, that's what I ended up doing to "repair" it....using Record or Update after re-adjusting is an option of course, but my problem was that I really need the effect "as it is" when I record to another cuelist instead of the values going back to default.

Otherwise I wouldn't need to copy it from an existing cuelist ;-)

Well I'm happy to help by keeping your post active a little longer until someone who knows more about it comes along.  But they might tell you that you should just record your new cue first, then alter the parameters of the effect and update.

Hope that helps. B

Well I'm happy to help by keeping your post active a little longer until someone who knows more about it comes along.  But they might tell you that you should just record your new cue first, then alter the parameters of the effect and update.

Hope that helps. B

This is a known issue that we are planning to address in an upcoming build.  In the meantime, the suggestions posted here are the best work around.

Thanks much!

a

Thanks a lot !