relay out (remote trigger connection)

Hi Edwin,

you can read more about how to use remote trigger at this forum post :

http://community.etcconnect.com/forums/p/2923/10993.aspx#10993

Can you be a little bit more specific. I looked at the forum post, but for me it was not very clear. What does the relay out do? Does it give a 12v signal when turned on. It does that 4 times or 8 times. Sorry but for me the diagram is not very clear.

How do I activate it?

Thanks so far

Edwin, 

I am planning on adding information to our Wiki page on this topic.  However, if you need to get this working in short order I would recommend giving me a quick call and I can talk you through this.

Call Tech Support and ask for Matt Kerr

Thanks so far Matt Kerr,

I'm defenitly working on it now because I am a freelancer with a gap in my schedule. So that's why I'm doing the research now  and also try to finish it. Not that I need it right away.

I think I got the relay so far working that I hear it go on and off everytime I press the go-button :

cue1 execute relay 1 on

cue 2 execute relay 1 off

The only problem is I don't know how to connect it to a device, like for instant say a 12v lightbulb (the most simple thing I thought) Maybe I'm thinking totally wrong, but can you say how I can connect it to make it go on and off everytime I press the go-button?

Thanks Edwin

Did you already write a WIKI on the topic Relay out?

I did now ;)

http://community.etcconnect.com/wikis/products/ion-and-element-relay-out-and-contact-closure-inputs.aspx

I did now ;)

http://community.etcconnect.com/wikis/products/ion-and-element-relay-out-and-contact-closure-inputs.aspx