Why do lights stay on even after clearing everything? I'm not the one who set up the console. I'm learning the device. All lights, except about 10, turn off when cleared. Can't figure out why those 10 lights will not turn off, move, or change c
All but 10 lights does not respond to functions. They turn on with the lights but stay on.
Are the fixtures that stay on in an existing show file patched correctly? Check that the fixtures in your system are the ones in the patch, and check that their addresses and modes are the same as you have in the console. If it doesn't match up, then you could well have a fixture's intensity address inadvertently patched as some other fixture's colour parameter or something. If you start a new show file, the patch will be empty and that problem would go away.
Are the fixtures that stay on in an existing show file patched correctly? Check that the fixtures in your system are the ones in the patch, and check that their addresses and modes are the same as you have in the console. If it doesn't match up, then you could well have a fixture's intensity address inadvertently patched as some other fixture's colour parameter or something. If you start a new show file, the patch will be empty and that problem would go away.
