• State Verified Answer
  • +1 person also asked this people also asked this
  • Date
    Jeff Perry
  • Date
  • Replies 4 replies
  • Answers 1 answer
  • Subscribers 189 subscribers
  • Views 870 views
  • Users 0 members are here

Help setting up Fader to control prizm rotation speed in ML fixture.

I'm a self-taught volunteer. Trying to setup a fader to control rotation speed. The fader I setup acts like a switch 0 to 20 with nothing in between. For ref the fixtures are Clay Paky Mythos 2 & I'm wanting to control the Prizm rotation speed with a fader that controls rotation as a variable speed 0 to 20 an in between.

Looking for help with how to set this up correctly. 

Thanks 

Jeff

Sanford PAC Maine

Parents
  • +1

    The Rotation-Parameter is set to Snap in the Fixture.
    If you undo the Snap in the Fixture Editor, you can fade it via the Submaster.

    Keep in Mind what ueli pointed out.
    I like to set a Home Preset, with the Parameter that needs to fade, set to 0.
    That will help that you don't fade over to the negative half of the values.

    This also works for Strobe the same way.

Reply
  • +1

    The Rotation-Parameter is set to Snap in the Fixture.
    If you undo the Snap in the Fixture Editor, you can fade it via the Submaster.

    Keep in Mind what ueli pointed out.
    I like to set a Home Preset, with the Parameter that needs to fade, set to 0.
    That will help that you don't fade over to the negative half of the values.

    This also works for Strobe the same way.

Children
No Data
Related

www.etcconnect.com