How to fade the cues with effect?

If I'm understanding correctly, you're wanting to press Go and have the effect stop immediately and then have the channel intensity fade out in the cue's timing.

As Geoff suggested, there are a handful of ways I can come up with to do this.

Here is the method I would suggest:

-In the effect's editor, select your effect.

-In the lower right side of the CIA, select 'Exit'

-From here, select 'Stop and Fade' and then 'ExitTime' [0, Enter]

This effectively tells the effect to stop and then fade the channels back to their background state for however long the exit time is (in this case, 0). If you don't want this change on the entire effect (ie you use this effect elsewhere in your show, and don't want it to stop immediately in those places), you can press [Effect] with a cleared command line (in your channel summary) in the cue with the effect running, to make a 'one-off' change to the effect behavior. 

Hope this helps.

If I'm understanding correctly, you're wanting to press Go and have the effect stop immediately and then have the channel intensity fade out in the cue's timing.

As Geoff suggested, there are a handful of ways I can come up with to do this.

Here is the method I would suggest:

-In the effect's editor, select your effect.

-In the lower right side of the CIA, select 'Exit'

-From here, select 'Stop and Fade' and then 'ExitTime' [0, Enter]

This effectively tells the effect to stop and then fade the channels back to their background state for however long the exit time is (in this case, 0). If you don't want this change on the entire effect (ie you use this effect elsewhere in your show, and don't want it to stop immediately in those places), you can press [Effect] with a cleared command line (in your channel summary) in the cue with the effect running, to make a 'one-off' change to the effect behavior. 

Hope this helps.