3.2.1 Recall From issue

There is something that sounds similar in the build report of current 3.2.3 beta. Maybe you want to check in that version of you can still see it?

Thanks, will wait it out and see if 3.2.3 fixes it. Not a huge pain but should be fixed soon.

Thanks, will wait it out and see if 3.2.3 fixes it. Not a huge pain but should be fixed soon.

Did you have an opportunity to have a look at this in 3.2.3? Let us know!

Hi! I'm afraid that in 3.2.4 I'm still seeing a difference in recalling colors between the following syntaxes;

All channels at home values except Group 5 that has a cyan-ish color picked manually from color picker and at Full.

(Group 5 is S4 LED S2 Lustr QS General, Group 80 is Robe T2 Profile (modified profile, only regarding handling of frost))

1. Group 80 RecallFrom Group 5 Enter

2. Group 80 Color RecallFrom Group 5 Enter

Syntax 1 will result in the same values a Copy to operation will the other way around.

Doing a CopyTo, regardless of whether the Color Category is specified, will yield the correct results, same as syntax 1 above. Syntax 2 gives a blue-ish color.

Edit: Logs collected if you need.